Large Format RFID Inlay

The RFID tag in a smart label. It comprises the chip and aluminum, copper or silver antenna bonded to a polyethylene terephthalate (PET) layer that is delivered to the label maker "dry" (without adhesive) or "wet" (attached to a pressure sensitive liner). The inlay is adhered to the back side of the label and printed and encoded in an RFID printer.
Large format RFID Inlay, our inlay format can be custmized and can be extremly large size. Hence if you need special size inlay.

Weight: 50g+/-1g
MOQ: 100pcs or negotiable
Dimensions: 310mm*468mm, Max. size; 520mm*420mm, A4 210mm*297
Layout: 2*5, 4*5, 5*5, 4*6, 4*7, 4*8, 3*6, 3*7, 3*8
Thickness: normal 0.45mm, 0.5mm, min.0.3mm or as per your request
Chips Options:
Low frequency 125KHZ RFID card: TK4100, EM4100, EM4200, EM4305, T5577, Hitag1, Hitag2
High Frequency 13.56MHZ RFID card: NTAG 203, NTAG 213, Ultralight, Ultralight C, Fudan08, DESFIRE, DESFIRE EV1, ICODE SLI, Classic S50 1K, Classic S70 4K, etc
Memory: 96bit / 512bit / 1-8Kbit / 1KByte / 2KByte / 8KByte
Write Cycle: 100,000 times
Lifetime: 10 years
Sample Availability: Free samples are available upon request.

Pre Product

Ultra Thin Sheet Inlay

Next Product

Dual Frequency RFID Inlay

* Any question or inquiry about RFID card and RFID related products, please send email to info@oprfid.com, we will reply you within 24 hours, thanks

RFID inlays are composed of an IC (Integrated Circuit, Chip) and a Dipole antenna. To attach the antenna to the IC we commonly use a strap. RFID inlays can be either "wet" or "dry" Wet inlays are inlays that have an adhesive backing with a clear or colored topsurface of PVC, PET or paper, the PVC or PET wet inlays are commonly used to make "RFID Labels" where the inlay is placed on the back of the label with the adhesive side away from the label side so that the label has continuous adhesive. PLacement of the wet inlay on the label is very specific to each RFID printer in order to be programmed correctly by the printer and also to minimize the risk of damaging the RFID inlay while in the printer.