>> RFID Inlay >> HF Inlay/Antenna
HF Inlay/Antenna
HF (High Frequency) Antenna, which has a rate around 13.56MHz, commonly used in all kinds of bank cards, tickets, access system and passport etc.
OPRFID has the ability to design the specific HF products according to your requirement. Recently the minimum trace width and space we can produce is 0.2*0.2mm for HF Antenna.
Also you can easily choose the delivery form of single lane or multiple lanes as you need.
| Junmp HF Inlay |
| Picture |
Model number |
IC Type, Size, Protocol |
 |
JMP HF101 |
IC Type: |
QR2213 |
| Antanna (mm): |
40*40 |
| Protocol: |
ISO/IEC 14443 |
 |
JMP HF102 |
IC Type: |
QR2213 |
| Antanna (mm): |
75*25 |
| Protocol: |
ISO/IEC 14443 |
 |
JMP HF108 |
IC Type: |
QR2217 |
| Antanna (mm): |
76*45 |
| Protocol: |
ISO/IEC 14443 |
 |
JMP HF111 |
IC Type: |
FM11RF08 |
| Antanna (mm): |
76*45 |
| Protocol: |
ISO/IEC 14443 |
| HF Antenna size List |
| No. |
Antenna size (mm) |
Mifare 1k |
Mifare Ultralight |
FM1108 |
I-code SLI |
I-code SLIS |
Ntag21X series |
TI2048 series |
| 1 |
D20 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 2 |
D21 |
N |
N |
N |
N |
N |
Y |
N |
| 3 |
D22 |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
| 4 |
D25 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 5 |
15*15 |
Y |
Y |
Y |
Y |
Y |
Y |
N |
| 6 |
22.5*38 |
Y |
Y |
Y |
N |
N |
N |
Y |
| 7 |
D30 |
Y |
Y |
Y |
N |
N |
Y |
N |
| 8 |
D33 |
N |
N |
N |
Y |
Y |
N |
N |
| 9 |
40*40 |
Y |
Y |
Y |
N |
N |
Y |
N |
| 10 |
22*37 |
Y |
Y |
Y |
Y |
Y |
Y |
N |
| 11 |
45*45 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 12 |
D40 |
Y |
Y |
Y |
Y |
Y |
Y |
N |
| 13 |
52*15 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 14 |
32*32 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 15 |
45*76 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 16 |
26*11 |
Y |
Y |
Y |
Y |
Y |
Y |
N |
| 17 |
D27 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 18 |
D34 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 19 |
22*35 |
N |
N |
N |
Y |
Y |
N |
N |
| 20 |
22*34 |
N |
N |
N |
Y |
Y |
N |
N |
| 21 |
D22+5 |
Y |
Y |
Y |
Y |
Y |
N |
N |
| 22 |
D35 Metal Label |
Y |
Y |
Y |
N |
N |
N |
N |
| 23 |
26*11 Jewelry Label |
Y |
Y |
Y |
Y |
Y |
N |
N |
1.The listed sizes are antenna size.
2.The length and width of dry inlay, wet inlay, lable must be 4mm longer than antenna size.
3. we supply OEM service for antenna size.
RFID tags have been increasingly popular in the field of advanceditem identification technology. Though universal adoption of RFID smart label is taking time, many retail giants including Wal-Mart and Carrefour promote the use of RFID tags to replace traditional barcodes as a more effective method of item tracking. Beyond the retail sector, other examples of RFID usage are in swipe-less credit cards and for logistics purposes.
A key component of any RFID tag is the antenna. That is the zig-zag pattern you see, usually on the underside of the tag. The RFID inlay antenna is most commonly made of copper, aluminum, or silver through a process known as etching. These loops of metal strips form the circuitry to send and receive electromagnetic signals to and from the RFID reader, allowing item tracking and identification.
OPRFID RFID inlay antennas are typically sold on rolls and sandwiched between plastic facings for protection during transit. The antenna needs to have a chip attached to it so that they can form a complete RFID inlay, which is the functional part of the RFID label.
The number of uses for RFID labels is nearly endless across a huge variety of industries. While there is a wide range of chips for RFID inlays, there is an extensive array of RFID inlay/antenna patterns as well, including the paperclip, squiggle, and dogbone designs. Most of our tag's antennas are tailor made for a specific use. Contact us today to customize your RFID inlay/antennas.
* Any question or inquiry about RFID card and RFID related products, please send email to info@oprfid.com, we will reply you within 24 hours, thanks
|
